Dari  Alat Uji dan Mesin  SF-832 CHASSIS DYNO 0
Dari  Alat Uji dan Mesin  SF-832 CHASSIS DYNO 1

Alat Uji dan Mesin SF-832 CHASSIS DYNO

N/A
Informasi Produk
Pembelian Minimum 1 1
Stock 1
Negara Asal American Samoa
Kategori
Update Terakhir 21 Sep 2021

Alat Uji dan Mesin



Overview



The AutoDyn™ 30 chassis dyno is quite possibly the most versatile chassis dynamometer on the market today. It comes standard with SuperFlow® Road Simulation Technology (RST) to accurately load vehicles according to their inertia, aerodynamic losses and rolling losses. The 2,500 hp measurement capacity and its available 2,200 hp absorption capability allow you to test just about anything a customer would bring through your door. The AutoDyn™ 30 was the first chassis dyno on the market to feature the innovative center mounted eddy current design. This design makes the footprint of the AutoDyn™ 30 very small, saving you valuable shop space without losing any of the benefits of being able to perform both loaded and inertia tests.



Adding to it's versatility is the available upgrade paths for the AutoDyn™ 30. Should your testing needs change, the AutoDyn™ 30 can be upgraded to AWD and/or AC Motoring at any time. Adding a second roll set and a driveshaft to synchronize the front and rear rolls transforms the AutoDyn™ 30 into the AutoDyn™ 30 AWD. Adding SuperFlow’s™ AC electric motor allows you to motor the test vehicle to perform emissions drive cycles, inertia simulations, evaluate frictional losses and conduct many other engineering test procedures. These available upgrade paths give you great flexibility and peace of mind so that if your testing needs were to change in the future you won’t need to buy an entirely new piece of equipment, simply upgrade the dyno to meet your new requirements.



Its 30” knurled rolls provide superior traction and minimal tire deflection so testing is accurate and repeatable. The AutoDyn™ 30 combines the low profile frame commonly found on cradle roll systems with the added traction benefits of a large single roll dyno so it works perfect in a pit of with a 4-post lift.



Informasi Pemesanan dan Pembelian Hubungi :

Telepon: (021) 29563045

Mobile: 0821 2505 4143 & 0877 8830 6414

Email : sales@testindo•com

Whatsapp : 0813 9929 1909



Website : https://www.dynamometerindonesia.com


Gambar Produk
Dari  Alat Uji dan Mesin  SF-832 CHASSIS DYNO 0
Dari  Alat Uji dan Mesin  SF-832 CHASSIS DYNO 1

PT Testindo

Status Pajak: Non PKP

PT TESTINDO Merupakan SOLUSI #1 dalam Monitoring System & Control System INDONESIA, Produk & Jasa yang kami sediakan diantaranya:
Produk: - Rubber Testing Equipment (Rheometer,Mooney Viscometer,Ozone Tester Chamber,Tensile Strength Tester,Aging Oven Tester Dll)- Sensor & Tranducer- Non Destructive Testing- Sound Level Meter- Alat Uji Tanah (Soil Test)- Data Logger (Temperature & Humidity Data Logger,Alat Ukur Suhu)- Borescope- Balancing Machine- Laser Alignment- Tank Level Monitoring- Universal Testing Machine- Oil Analysis
Jasa Engineering:- Monitoring System Customize- Control System Customize- Integrated Online Monitoring - Condition Monitoring- Repair & Upgrade Service

Kami memiliki pengalaman dalam berbagai aplikasi monitoring system & control system di indonesia sebagai berikut: - B2TKS BPPT (2010)- Bump Test Services:(Analisis Frekuensi Pribadi) produk Velg- Bali (2009): Sistem Monitoring dan Analisis Bunyi Alat Kesenian- PU (Pusjatan) Bandung (2009): Sistem Monitoring Jembatan- Bahtera Indoamplas Gemilang (2010): Up-Grade Material Testing Machine- STPI Curug (2009): Energy Power Data Acquisition & Analyzer- Teknik Mesin Universitas Bengkulu (2009): Dynamic signal analyzer- Universitas Bengkulu (2009): Data akuisisi dan sensor untuk Pengujian Mekanik dan Listrik- UGM Yogyakarta (2010): Data akuisisi untuk pengujian struktur sipil- Universitas Atma Jaya Yogjakarta (2010): Sistem Monitoring untuk Pengujian Sipil- PLN Pusharlis Bandung (2011): Turbine System Monitoring 16 channel - Indonesia Power UP Mrica (2011): Vibration Monitoring- Lembaga Sandi Negara (2011): Dynamic Signal Analyzer- ABB Installation Materials (2010): Desain fuse test (100% QC)- Jembatan Suramadu (2007-2009): Desain Instrumentasi pada project Structural Health Monitoring System (SHMS)

Keuntungan Anda Memilih Kami, Sebagai Solusi Permasalahan Anda, Adalah :- Garansi After Sales - Support Engineering Berpengalaman & Handal- Harga Kompetitif Dengan Teknologi TerbaikUntuk Informasi Lebih Lanjut Seperti Spesifikasi Lengkap,Video Atau Katalog Anda Dapat Mengunjungi Website Kami Di www.testindo.com & www.testingindonesia.com Atau Segera Hubungi Kontak Dibawah Ini:
Pt TestindoOffice:Jl.Radin Inten No 61 B Duren Sawit Jakarta Timur - IndonesiaTelp (021) - 2956 3045Fax: (021) - 2956 3052
Email:sales@testindo.comWebsite:www.testingindonesia.com | www.testindo.com

Lihat Selengkapnya
Detil Produk

Alat Uji dan Mesin



Overview



The AutoDyn™ 30 chassis dyno is quite possibly the most versatile chassis dynamometer on the market today. It comes standard with SuperFlow® Road Simulation Technology (RST) to accurately load vehicles according to their inertia, aerodynamic losses and rolling losses. The 2,500 hp measurement capacity and its available 2,200 hp absorption capability allow you to test just about anything a customer would bring through your door. The AutoDyn™ 30 was the first chassis dyno on the market to feature the innovative center mounted eddy current design. This design makes the footprint of the AutoDyn™ 30 very small, saving you valuable shop space without losing any of the benefits of being able to perform both loaded and inertia tests.



Adding to it's versatility is the available upgrade paths for the AutoDyn™ 30. Should your testing needs change, the AutoDyn™ 30 can be upgraded to AWD and/or AC Motoring at any time. Adding a second roll set and a driveshaft to synchronize the front and rear rolls transforms the AutoDyn™ 30 into the AutoDyn™ 30 AWD. Adding SuperFlow’s™ AC electric motor allows you to motor the test vehicle to perform emissions drive cycles, inertia simulations, evaluate frictional losses and conduct many other engineering test procedures. These available upgrade paths give you great flexibility and peace of mind so that if your testing needs were to change in the future you won’t need to buy an entirely new piece of equipment, simply upgrade the dyno to meet your new requirements.



Its 30” knurled rolls provide superior traction and minimal tire deflection so testing is accurate and repeatable. The AutoDyn™ 30 combines the low profile frame commonly found on cradle roll systems with the added traction benefits of a large single roll dyno so it works perfect in a pit of with a 4-post lift.



Informasi Pemesanan dan Pembelian Hubungi :

Telepon: (021) 29563045

Mobile: 0821 2505 4143 & 0877 8830 6414

Email : sales@testindo•com

Whatsapp : 0813 9929 1909



Website : https://www.dynamometerindonesia.com


Dari  Alat Uji dan Mesin  SF-832 CHASSIS DYNO 0
Dari  Alat Uji dan Mesin  SF-832 CHASSIS DYNO 1