Thermometer Digital TL1-W ThermoProbe |
Technical Specifications |
Display | LCD with 0.25 inch characters |
Backlit Display |
Trend Indicating Arrows |
Low Battery & Fault indication |
Resolution 0.1 or 0.01 |
User Functions | Auto Off after 20 minutes or continuous operation |
Lowest Reading, Highest Reading, Average Reading |
Switchable in Units of °F or °C |
Display tenths or hundredths resolution |
Certification | ATEX & IECEx ( Ex ib IIC T4 ) |
Construction | Rugged Anodized Aluminum Frame and Enclosure with silicone seal and a polyester graphics window. |
Nominal Body Dimensions : 3.9 x 1.6 x 1.8" ( 10 x 4.1 x 4.6 cm ) |
Highly durable display window, graphics and membrane switches. |
Weight | 6.35 oz ( 180 grams ) |
– with 8" sensor |
Temperature | Resolution 0.01 Degrees |
Calibrated Accuracy : |
±0.1 °F from 14 to 320 °F |
±0.06 °C from -10 to 160 °C |
Range : -40 °F to 400 °F ( -40 °C to 204 °C ) |
NIST Traceable Report of Test |
Temp. Time Constant | 6.5 seconds in circulated water bath |
( 63.2 % response to temperature change ) |
Electronics | Microcontroller and precision 20 bit A/D Converter |
FLASH memory |
Recommended Temperature Range For best Accuracy 32 to 112 °F, 0 to 44 °C |
Sensor | Stainless Steel RTD temperature sensor |
– 100Ω Shock resistant Thin Film RTD |
– Standard 8" ( 20 cm ) or 12" ( 30 cm ) lengths |
– Standard 0.25" ( 6.35 mm ) diameter with 0.188" ( 4.76 mm ) reduced tip |
– Recommended Minimum Immersion Depth : 3" ( 7.6 cm ) |
Batteries | 2 AAA Duracell MN2400 |
Up to 350 hours service life at 70 °F ( 21 °C ) |
– Dependent on backlight usage |
Operating Temperature Range -4 °F to 130 °F ( -20 °C to 54 °C ) |
Note : Battery may not provide adequate power if used outside operating range. |
Notes | Specifications subject to change, See data sheet for latest information. |
Custom ranges, configurations and sensor lengths available upon request. |