Dari Rigol DS1102E 100MHz Digital Oscilloscope 0

Rigol DS1102E 100MHz Digital Oscilloscope

Pembelian Minimum 1
Negara Asal United States
Update Terakhir 04 Nov 2019


CV. Andalan Prima Sejahtera

Verified Supplier
1 Tahun

Perum. Bintang Metropol Jl. Jupiter VI , Blok A7 No 16 Bekasi Utara – Indonesia. 17122

No. Telepon


No. Whatsapp

Klik Disini

Detil Produk Rigol DS1102E 100MHz Digital Oscilloscope

Rigol DS1102E 100MHz Digital OscilloscopeCheck out the reviews below.  The rigol ds1102e is one of the most popular 100 Mhz scopes in the USABuy from the Top Rigol Distributor in the USA. 1 GSa/s maximum real-time sample rate1Mpts long Memory Depth.  ( Compare this to like scopes with
Dapatkan penawaran terbaik untuk Rigol DS1102E 100MHz Digital Oscilloscope !
Jumlah Order
IndoTrading.com adalah media iklan khusus perusahaan, distributor, Grosir, Agen, Supplier, Trading dan Pabrik. Jika anda tertarik untuk membeli Rigol DS1102E 100MHz Digital Oscilloscope ini dengan harga murah, Mohon hubungi Kontak Perusahaan ini diatas.

Jika anda adalah perusahaan yang ingin menjual di IndoTrading.com ,
Detil Produk

Rigol DS1102E 100MHz Digital Oscilloscope

  • Check out the reviews below.  The rigol ds1102e is one of the most popular 100 Mhz scopes in the USA
  • Buy from the Top Rigol Distributor in the USA. 
  • 1 GSa/s maximum real-time sample rate
  • 1Mpts long Memory Depth.  ( Compare this to like scopes with just kb memory vs Mb! )
  • 100 MHz Bandwidth
  • USB host support on the front of the DS1102E
  • Ultra compact design.  Fits on your desktop better
  • Advanced trigger modes: Edge, Video, Pulse Width, Slope, Alternate
  • Adjustable bigger sensitivity: Effectively filter noise from bigger signal and avoid false trigger
  • Cursor measurements: Manual, Track and Auto Measure modes
  • 10 waveforms, 10 setups, BMP and CSV storage.
  • Math functions:+, -, x, FFT, Invert
  • Special digital filter and waveform recorder

Manufacturer Specs

Bandwidth100 MHz50 MHz100 MHz50 MHz
Sample ModesReal-Time SampleEquivalent Sample
Sample Rate1GSa/s [1] , 500MSa/s
Input CouplingDC, AC, GND
Input Impedance1MΩ±2%, the input capacity is 18pF±3pF
Probe Attenuation Factors1X, 5X, 10X, 50X, 100X, 500X,1000X
Maximum Input Voltage400V (DC+AC Peak, 1MΩ input impedance)
40V (DC+AC Peak) [2]
Time Delay between Channel (typical)500ps
Sample Rate RangeReal-Time: 13.65Sa/s-1GSa/s
Equivalent: 13.65Sa/s-25GSa/s
Waveform InterpolationSin(x)/x
Memory DepthChannel ModeSample RateMemory Depth (normal)Memory Depth (long memory)
Single Channel1 GS/s16 kptsN/A
Single Channel500MS/s Or lower16 kpts1 Mpts
Dual Channel500MS/s Or lower8 kptsN.A.
Dual Channel500MS/s Or lower8 kpts512 kpts
Scanning Speed Range (Sec/div)2ns/div~50s/div, DS1102X
5ns/div~50s/div, DS1052X
1-2-5 Sequence
Sample Rate and Delay Time Accuracy±50ppm (any interval ≥1ms)
Delta Time Measurement Accuracy (Full Bandwidth)Single: ±(1 Sample interval + 50ppm × reading + 0.6 ns)
>16 averages: ±(1Sample interval + 50ppm × reading + 0.4 ns)
A/D Converter8-bit resolution, all channels sample simultaneously
Volts/div Range2mV/div~10V/div (at the input terminal connecting to BNC)
Maximum InputMaximum input voltage on analog channel
CAT I 300Vrms, 1000Vpk; instantaneous overvoltage 1000Vpk
CAT II 100Vrms, 1000Vpk
RP2200 10:1:CAT II 300Vrms
RP3200 10:1:CAT II 300Vrms
RP3300 10:1:CAT II 300Vrms
Offset Range±40V (250mV/div~10V/div)
±2V (2mV/div~245mV/div)
Analog Bandwidth100MHz (DS1102D,DS1102E)
50MHz (DS1052D, DS1052E)
Single-shot Bandwidth100MHz (DS1102D, DS1102E)
50MHz (DS1052D, DS1052E)
Selectable Analog Bandwidth Limit (typical)20MHz
Lower Frequency Response (AC –3dB)≤5Hz (at input BNC)
Rise Time at BNC (typical)<3.5ns, <7ns, respectively at 100MHz, 50MHz
Dynamic range±5div
DC Gain Accuracy2mV/div-5mV/div:
±4% (In Normal or Average acquisition mode)
±3% (In Normal or Average acquisition mode)
DC Measurement Accuracy, Average Acquisition ModeWhen vertical displacement is zero, and N ≥16: ±(DC Gain Accuracy×reading+0.1div+1mV)
When vertical displacement is not zero, and N ≥16: ±[DC Gain Accuracy×(reading+vertical displacement)+(1% of vertical displacement) + 0.2div]
When vertical scale is between 2mV/div and 245mV/div, add 2mV more for setting value.
When vertical scale is between 250mV/div and 10V/div, add 50mV more for setting value.
Delta Volts
Measurement Accuracy
(Average Acquisition Mode)
Under sam e setting and condition, the voltage difference (?V) between any two points in the waves coming from the average of more than 16 waves have been acquired: ±(DC Gain Accuracy×reading + 0.05 div)
Trigger Sensitivity0.1div~1.0div (adjustable)
Trigger Level RangeInternal±6 divisions from center of screen
Trigger Level Accuracy (typical) applicable for the signal of rising and falling time ≥20ns yInternal±(0.3div × V/div)(±4 divisions from center of screen)
EXT±(6% of setting + 200 mV)
Trigger OffsetIn Normal mode: pre-trigger (memory depth/ 2*Sample rate), delayed trigger 1s
In Slow Scan mode: pre-trigger 6div, delayed trigger 6div
Trigger Holdoff Range500ns~1.5s
Set Level to 50% (typical)When input signal frequency ≥50Hz
Edge Trigger
Edge trigger slopeRising, Falling, Rising + Falling
Pulse WidthTrigger
Trigger Condition(>, <, =) Positive pulse width, (>, <, =) Negative pulse width
Pulse Width Range20ns ~10s
Video Trigger
Video Standard Line FrequencySupport for standard NTSC, PAL and SECAM broadcast systems. Line number range: 1~525 (NTSC) and 1~625 (PAL/SECAM)
Slope Trigger
Trigger Condition(>, <, =) Positive slope, (>, <, =) Negative slope
Time Setting20ns~10s
Alternate Trigger
Trigger on CH1Edge, Pulse Width, Video, Slope
Trigger on CH2Edge, Pulse Width, Video, Slope
Pattern Trigger [2]
Pattern TypeD0~D15 select H, L, X, ,
Duration Trigger [2]
Pattern TypeD0~D15 select H, L, X
Qualifier>, <, =
Time Setting20ns~10s
ManualVoltage difference between cursors (∆V)
Time difference between cursors (∆T)
Reciprocal of ∆T in Hertz (1/∆T)
TrackVoltage value for Y-axis waveform
Time value for X-axis waveform
AutoCursors are visible for Automatic Measurement
Auto MeasureVpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1→2 , Delay1→2

[1] Only one channel is available when the Sample rate is 1GSa/s.
[2] For DS1000D Series.

General Specifications
Display Type145mm (5.6 inch) diagonal TFT Liquid Crystal Display
Display Resolution320 horizontal ×RGB×234 vertical pixels
Display Color64k color
Display Contrast (typical)150:1
Backlight Brightness (typical)300 nit
Probe Compensator Output
Output Voltage (typical)Approximately 3Vpp (peak to peak value)
Frequency (typical)1kHz
Power Supply
Supply Voltage100 ~ 240VAC RMS , 45~440Hz, CAT II
Power ConsumptionLess than 50W
Fuse2A, T level, 250 V
Ambient TemperatureOperating 10℃ ~ 40℃
Non-operating -20℃ ~ +60℃
Cooling Methodfan cooling
Humiditybelow +35℃ : ≤90% relative humidity
+35℃ ~ +40℃ : ≤60% relative humidity
AltitudeOperating at 3,000 m or below
Non-operating at 15,000 m or below
WeightWithout package2.3kg
IP ProtectionIP2X
Calibration IntervalThe recommended calibration interval is one year