Dari Polyurethane Timing Belt Optibelt Alpha V 0

Polyurethane Timing Belt Optibelt Alpha V

Pembelian Minimum 1
Negara Asal Germany
Update Terakhir 08 Sep 2018
Harga
CALL

Penjual

PT Mahardika Wisnu Karya

Verified Supplier
Alamat

Jl. Letjend. Ryacudu No. 1D (Jalur Dua Korpri) Sukarame

Detil Produk Polyurethane Timing Belt Optibelt Alpha V

Timing belts – endless, welded polyurethaneoptibelt ALPHA V timing belts are made from open-ended, extruded optibelt ALPHA LINEAR timing belts that are welded together to achieve the specified length. They are used primarily in transport systems.Despite the break in the tension cords at the fi
Dapatkan penawaran terbaik untuk Polyurethane Timing Belt Optibelt Alpha V !
Nama
Jumlah Order
Unit
IndoTrading.com adalah media iklan khusus perusahaan, distributor, Grosir, Agen, Supplier, Trading dan Pabrik. Jika anda tertarik untuk membeli Polyurethane Timing Belt Optibelt Alpha V ini dengan harga murah, Mohon hubungi Kontak Perusahaan ini diatas.

Jika anda adalah perusahaan yang ingin menjual di IndoTrading.com ,
Detil Produk

Timing belts – endless, welded polyurethane

optibelt ALPHA V timing belts are made from open-ended, extruded optibelt ALPHA LINEAR timing belts that are welded together to achieve the specified length. They are used primarily in transport systems.
Despite the break in the tension cords at the finger spliced joint, the welded timing belts still achieve at least 50% of the permissible tractive force achieved by belts with continuous cords. This is due to the high strength of the thermoplastic polyurethane.
When polyamide fabric is welded to the polyurethane belts, the fabric is simply butt jointed and not bonded together at its ends. In contrast, reinforced top surfaces and T2, yellow PU foam and APL plus coatings as well as the tooth side of the belt can be welded together as a joint-free composite.

Profile
T5; T10; T20
AT5; AT10; AT20
5M; 8M; 14M
XL; L; H; XH
T5K6; T10K6; T10K13
AT5K6; AT10K6; AT10K13
F2; F 2.5; F3

Dimensions
Minimum welding lengths: 400 to 1,200 mm,
depending on width and pitch

Advantages

  • Lengths can be manufactured according to gradations in pitch.
  • Can be supplied cost-effectively and at short notice
  • The reinforced top surface version and the T2, yellow PU foam or APL plus versions can be welded in composite

Properties

  • Also available with polyamide fabric on the tooth side and/or belt back
  • PU also available with FDA approval for food contact
  • Direct welding on of cams and cleats
  • Despite breaks in the tension cords, these belts offer approx. 50% of the performance of continuous cord timing belts

Polyurethane Belt